Mold Temperature Controller also called MTC in short form. The mold temperature controller circulates cooling fluid through the mold's cooling circuits to provide equilibrium to the heat flux experienced by the mold for every cycle. There are 2 types of MTC one is Oil type and another one is water type. Oil type works on more high temperature. The mold temperature should be set in a manner such that the surface temperature will be between 120 to 180°C. Also, ensure that the surface of the mold has a uniform temperature distribution. If the mold temperature is excessively low, moldings may warp or crack (rupture) due to residual stresses. Temperature Range: 180 Deg C. Voltage: 90-270 VAC/DC. Frequency: 50/60 Hz. Flow Rate: 40 L/min. Mold temperature in injection molding refers to the temperature of the cavity surface when molding is performed. In-mold design and molding engineering condition setting, it is important not only to maintain an appropriate temperature but also to make it evenly distributed. mould temperature controllers work with heat transfer oil as a heat transfer medium, which heats the mould and maintains its temperature for the right injection process. The series comes in three maximum temperature models: standard, high, and ultra-high temperature models. The standard model has a maximum working temperature of 200°C, the high model has a maximum working temperature of 300°C, and the ultra-high model has a maximum working temperature of 350°C. The heated oil is returned from the mould to the tank with cooling coils, and the oil can be chilled by indirect cooling with water. The high-pressure pump pressurizes the oil to the heating tank and the mould at a steady temperature with a precision of ±1℃. Hence, they can be used in other similar applications. We deal in Top Quality Mold Temperature Controllers starting range is from 6 kw to 36 kw. No1 quality mold temperature controller can give you best performance.